How annoying is it to see a tree stump while admiring your yard? The leftover stump from cutting your childhood treehouse or the tree you sat under with your best friend.
Sometimes we wish these tree stumps would go away, and while you could contact a professional to grind down the stump, it will take a lot of time and be very costly.
But eliminating a tree stump using charcoal is cheaper and less time-consuming.
General Safety Tips
- To prevent wildfire, make sure the stump is 17 feet away from your house and other structures.
- Always observe the stump as it burns and keep a fire extinguisher close by.
- Burn tree stumps on a windless day.
- Remove dried leaves and other flammable materials away from the stump.
Using Charcoal to Assist the Burn
Of all flammable materials, you would ask, why charcoal? Despite leaving it of mess inform of soot, charcoal is a cheap method of getting rid of tree stops.
It is not time-consuming compared to other alternatives, and there is less labor, and machinery involved.
Of course, there are also downsides to using charcoal, like the emission of smoke due to burning and the mess it leaves behind after burning.
But the use of charcoal is the best way to get rid of a tree stump.
How Long Does It Take to Eliminate A Tree Stump With Charcoal?
Considering the size of the tree stump and the climate condition of the selected day of burning.
The process, including drilling and letting the tree stump soaking vegetable oil, will take 1-3 days.
The burning process would take 12 to 48 hours. The overall process should take 3-5 days, depending on the size and state of the stump.
A hollow and dried stump will burn faster. But a wet and large stump may take a longer time to burn.
But compared to other methods (grinding and use of chemicals), the burning technique is faster.
What To Consider Before Burning a Tree Stump With Charcoal
The location of the stump: if a stump is in an area surrounded by trees and dried leaves, it is best to strictly adhere to safety precautions if burning with charcoal must be employed.
The size and condition of the stump: a stump will burn faster if it is dried or small. While a large or wet stump will take a longer time to burn.
The air current of an area: burning on a windy day may increase the risk of a fire hazard. The burning technique is best carried out on a windless day.
Tools Needed to Get Rid Of A Tree Stump With Charcoal
Gloves: The burning procedure involves working with fire and got charcoal. Safety gloves are needed to prevent your fingers from making direct contact with hot materials.
Face mask: a lot of smoke will be released during the burning process. To prevent inhalation of smoke, a face mask is required.
Fire extinguisher: As a safety measure, a fire extinguisher should be present to put out fires attempting to spread.
Power drill: A power drill is used to create holes on the surface and side of the stump as part of the burning process.
Vegetable oil: the stump soaks this vegetable oil to aid the burning process
A bag of charcoal: Well, you can’t get the party started without charcoal. They are the main ingredient required for the successful completion of this process.
Shovel: This is used in cleaning up the already burnt stump.
Steps To Getting Rid of a Tree Stump with Charcoal
Dig around the tree stump: dig around the tree stump to expose as much root as possible.
The hole dug should be 12 to 19 inches long (30.48cm to 48.26cm). The hole should be big enough to have a safe burn put.
Drill holes on the surface and sides of the tree stump: a power drill should be used to make multiple holes on the surface and sides of the tree stump.
The holes on the surface should be 2 inches apart and 12 inches deep. For a larger stump, more holes may be required.
The holes on the side of the stump should be 3 to 4 inches deep to intersect with the holes at the surface; these holes permit more accumulation of oil.
Fill the holes with vegetable oil: the holes drilled on the surface and sides of the stump should be filled with vegetable oil.
The aim is to allow the tree stump to soak as much oil as possible to aid the burning process. This step should be repeated 2 to 3 days before burning.
Pile charcoal on and around the stump: drop the bag of charcoal on the stump and tear it open.
It is unnecessary to unload the charcoal from its bag as it will serve as a material to kindle the fire.
Extra charcoal should be used to fill the base of the stump for proper burning.
Light the charcoal: when the heap is in place, light it up with a matchstick while wearing safety gloves.
Sometimes a little burning fluid is needed to ignite the fire. The fire should be monitored for hours, and if it is required to burn overnight, a metal basin should be used to cover the fire.
The area around the stump should be sprayed with water to prevent the fire from spreading. When the flame burns out, leave it to sit overnight and then come back the next day and light it up. Repeat the process for three days.
Cleaning up: after the stump is burnt, the root should be dug up, and the mess should be cleaned up. Digging up the root should be easy as the fire has done most of the work.
With these easy steps, you can successfully get rid of that tree stump lingering in your yard.
You May Also Like:
- How To Anchor a Swing Set on Grass, Turf, And Concrete?
- Factors to Consider When Buying a Snowblower for Gravel Driveway
- 5 Best Composting Grinder for Home Use
- Where To Set Up Inflatable Pools
- How to Keep Inflatable Pool Water Clean With Salt
- How Long Can You Leave Water in an Inflatable Pool
Hope this article helped you learn How to Get Rid of a Tree Stump With Charcoal. You may also want to bookmark our review on Best Inflatable Pool Cleaner Tool might need for your pool.
I will love to hear from you if you have any other suggestions on The Easy Way to Remove a Tree Stump with Charcoal. All you have to do is comment below and reach out to people by sharing this post on social media.