Removing the trimmer head on your Husqvarna trimmer allows you to replace it or perform a maintenance check.
Carrying this task out is easy and can be applied to other line trimmers, not just the Husqvarna trimmer. You will require an Allen wrench for this task, but this procedure can differ depending on the type of head your line trimmer has.
Keep reading to learn how to remove Husqvarna trimmer heads and carry out this procedure for other types of heads.
What Is A Husqvarna Trimmer Head?
Husqvarna trimmer is just the brand name for a line trimmer. The general name for this tool is line trimmer; this equipment is used to trim grasses or make the edge of your lawn neat. Line trimmers use a thin line to accomplish this task.
Line trimmers also go by other names, but all these names refer to the same tool. Line trimmers may be grass trimmers, garden trimmers, whipper snippers, hedge trimmers, weed eaters, or weed whackers.
Types of Line Trimmers
There are different designs of line trimmers; therefore, the head of your trimmer may differ from that of someone else’s. There are three types of trimmer heads, and the method of removing them all differ; it is important to know what type of head your trimmer has before attempting to remove it.
1. Fixed-line Trimmers
Fixed line trimmer heads utilize individual lines inserted one after the other, they can be adjusted when carrying out a task, and this setup prevents the lines from tangling up.
This head is great for large trimmers and is used for heavy-duty work; however, you will need to stop the trimmer each time a replacement needs to be made.
2. Bump-feed Trimmers
Unlike fixed-line trimmers that require you to fix each line individually at the same length, you can wrap the string around the spool of the line trimmer.
When this equipment is lightly bumped on the ground, the string is released from the spool through two openings on the trimmer.
This type of trimmer head is perfect for home use as it is easily operated and gives you control over the amount of string you use.
This trimmer head is very popular because its working system is simplified; however, the spring that activates this trimmer may wear out with continuous use.
3. Automatic Feed Trimmers
Automatic feed trimmers work similarly to bump feed ones, as the string will also be inserted in the trimmer head. The only difference is that an in-built motor controls the strings, and the strings are pulled instead of being cut.
Professionals mostly use this kind of trimmer head, which is usually expensive. It can be difficult to replace the spool motor when damaged; this is one of the problems with using this trimmer head.
How To Remove Husqvarna Trimmer Head
If the head of your line trimers needs some repair or cleaning, learning to remove it will allow you to carry out this task. Learning this procedure will also come in handy if you also want to install a new trimmer head.
Step one: Turn off your trimmer before attempting to remove the head and let it cool down if it’s hot. Unplug the spark plug wire from the spark plug to prevent it from starting accidentally.
Step two: Turn your trimmer to remove the head easily and locate the gearbox where the head and the shaft connect. A small hole can be observed between these two parts.
Step three: Insert an Allen wrench, screwdriver, or other similar tools into the hole and turn the trimmer head slowly while applying slight pressure on your Allen wrench until it moves down into the gearbox; this will lock the shaft. You can also do this by using the lock pin that comes with the trimmer.
Step four: Start twisting the head in the same direction the trimmer works to unscrew it. You may need to use a little force if it seems stiff.
Step five: If you have a new head, screw it back in the shaft following the opposite direction and tighten it as much as possible using your hand. If you are doing maintenance, you can screw the head back when you are done.
Step six: Remove the Allen wrench or the lock from the gearbox.
You may need additional information on a Husqvarna trimmer and how to remove its head. Fortunately, this section covers some frequently asked questions regarding this topic that may be helpful to you.
Is A Thicker String Trimmer Line Better?
The thickness of your string should depend on the task at hand. When dealing with long and tough grass, you should go with thick strings as they are strong enough to cut through tough grass and weeds. Thinner strings are best for simple lawn work like trimming your grasses or edging.
Which Trimmer Is Best For My Head?
The best trimmer should be compatible with your string trimmer head. The compatibility should match model type, size, and capacity. Read through the user manual to get the details on your string trimmer head.
What Is A Dual-line Trimmer?
Dual-line trimmers are trimmer heads that works using two strings. The dual strings help to cut through tough weeds easily, but they are quite expensive and can be complicated for beginners.
If it’s time for your periodic maintenance and you want to remove the head of your Husqvarna trimmer, you can use this guide to carry this task out. The steps above are detailed and describe how to remove and install your string trimmer head.
You should understand the type of string trimmer head and learn more about this removal procedure, as some details may differ. Knowledge of this information will also help you find the right trimmer for your string trimmer head.
- Weed Eater vs Weed Wacker
- Who Makes Ryobi String Trimmers
- Where Are Husqvarna Chainsaws Made
- Why Is My Echo Weed Eater Wont Start
- How Best to Hang Gas String Trimmer Storage
We trust this article helped you learn how to remove Husqvarna trimmer head. You may also want to check out Who Makes Ryobi String Trimmers.
Thanks for taking the time to read our article, and we hope you find it helpful. Would you mind leaving a comment below if you have any suggestions?
Kindly reach out to people by sharing this post on social media.