Put LED Lights in Cornhole

How Do You Put LED Lights in Cornhole? (6 Quick Ways)

Cornhole is a yard game where players take turns throwing bags of corn kernels on a board with a hole.

It’s so frustrating when you want to play a good game of cornhole at night, but then you can’t see properly.

We have compiled the necessary steps to install a LED light on cornhole; it’s a procedure you can carry out at home and on your own. We have also included other cornhole related tips and techniques for your use.

Where Do You Put the Lights on A Cornhole Board?

The LED ring light goes underneath the cornhole board. LED lights can also be on the surface of the board; they should be covering the edges of your board on all four sides.

How To Put Led Lights in A Cornhole?

Put LED Lights in Cornhole

You should know the materials required for this process.

  1. A LED ring light
  2. Screwdriver drill
  3. Tape (optional)

Your LED ring light should have a diameter of 7 inches. The following steps should guide you on how to install a LED ring light on your cornhole.

  1. Fit your ring light at the back of the cornhole board. The ring light should be a little bit bigger than your cornhole.
  2. Put clamps on all four sides of the ring light.
  3. Fit it appropriately around the corn hole and use a drill to drive in the screws on all four sides of the ring light, where the clamps have been fitted
  4. Your battery pack can be drilled or glued to the wooden board; it all depends on the type of ring light being bought. Put proceed with the drilling or sticking of the battery pack.
  5. Insert your 2D batteries (or whichever battery is to be used) into the battery pack. There might be a strap buckle to prevent your batteries from falling off. If there is, buckle the strap.
  6. Glue or drill the rocker switch to the back of the board for easy access.

The LED ring light varies, and you should consider buying one that comes with clamps, a battery-pack sticky side (with a strap of any sort), and some of these LED lights come with instructions on how to install the ring light.

You should also consider buying a waterproof LED ring light with plastic tubing around it. It will be helpful on rainy days.

How To Make a Cornhole Board Glow in The Dark?

You can make a cornhole board glow in the dark by installing cornhole rim lights. If you want an extra glow at the edges of your cornhole, then here are some simple steps to follow.

  1. Gather your materials; drill and screws, clamps, glue if necessary.
  2. Use a clamp on the first end of the light to the board.
  3. Use clamps to secure loose ends to the board. When you go around to your starting point, clamp both cords against each other and secure any loose cords under the board.
  4. Stick the adhesive end of the battery pack to the side of the cornhole board along with its switch. You can always apply your glue if your battery pack doesn’t come with an adhesive. Or you can use a drill too.

These lights come in different colors so does the LED ring light, so you can choose a color that suits you.

How Do I Make My Cornhole Board Lightweight?

Using any wood under a thickness of ¼ to build a cornhole board will be lightweight. Sure, carrying a cornhole board in and out of the yard (which is generally heavy); is why using a lightweight board is helpful in this situation. Though a board made from a thinner wood might not last.

What Is the Best Cornhole Technique?

1. The prep

Relax your body and hold your corn hole bag in your hand; lets its weight be equally distributed around your hand. Keep your mind focused on the game and nothing else; keeping yourself focused is important to make the right aim.

2. Proper stance

Your foot placement should be where you feel comfortable the most. As you raise your throwing arm, the leg opposite it (your throwing arm) should be planted forward (called the plant leg), and your other legs should be taken back a little. The power of your throw depends on your feet placement.

3. Aim

You can aim for the hole and score three points, right? Well, that’s false. When you aim for the hole, there is a high chance that the bag slides off course and lands on the grass.

Instead, you should aim for the center of the board; that way, even if you don’t make the hole, you can score one point for your bag landing on the board.

4. Toss and release

Take your time in this stage. You should find the right speed your arm can throw; you don’t want to throw at high speed as it can slide off. It is advisable to throw it like a Frisbee, an upward spinning movement. There are other types of toss techniques you can try out.

5. The follow-through

If you win, you can show off your nice victory dance moves. But the most important part is observing and learning from your mistake. Was your aim bad? Was your throw on a high speed. Then you practice after that to become better.

How Expensive Is a Cornhole?

Depending on the type you are buying, a cornhole set can be quite expensive. The price of a cornhole set ranges from $40 to $500. You can consider making your cornhole board if you don’t want to spend much.

Conclusion

Now, who says you can’t enjoy a good game of cornhole in the night? Using LED ring lights and rim lights, you can enjoy a cool game of cornhole; come on, these lights are cool.

The best part is that these lights can be installed within a few minutes without any physical labor.

Along with the suggested techniques, you should also win a cornhole game and show off your victory dance moves. With the price of a cornhole set, you can decide if you want to make your own board or if you want to buy one.

You May Also Like:

We trust this article helped you learn how to put LED Lights in Cornhole. You may also want to learn How To Install a Basketball Hoop on A Garage Wall or House?

Thanks for taking the time to read our article, and we hope you find it helpful. Would you mind leaving a comment below if you have any suggestions?

Kindly reach out to people by sharing this post on social media.

If you liked this article, then please follow us on FacebookInstagram, and Pinterest.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top