Backyard Backstop for Baseball and Golf

How to Build A Backyard Backstop for Baseball and Golf

Your backyard can serve a lot of purposes when you put more hard work into it. And a backyard backstop for your Baseball and Golf is one of them. Family time is supposed to be spent together to keep memories of a good time.

Sports in the backyard is one important thing that brings the family together cause it requires the participation of everyone in the family to be more enjoyable. And building a backyard backstop for baseball and Golf is not a bad idea.

When it comes to learning how to build a backyard backstop, it’s always a good idea to first learn the process or steps involved with building your backyard backstop. A backstop is vital because it will help prevent your ball from rolling off to the streets.

Your backyard backstop dimension will differ based on where your house is located and the surrounding you plan to build on.

If you surrounding is big and wide enough, you can go for a bigger and larger backstop, but if your surroundings are not wide enough, you can go for a smaller backstop, so while choosing the type of backstop you want to build, do well to consider these factors above and more to come.

Building a backstop in your backyard is a good idea that no one can deny; spending your leisure time with your family playing baseball or Golf is absolutely the best way to spend family time with fun. The laughter on your children’s faces can make your day special.

Friends and families can join you to play baseball or Golf in your backyard. Imagine when playing with friends and the ball roll-off to your neighbor’s yard. That will kind of scenario will kill the fun of playing the game.

But when you have a backyard backstop installed, you will never have a dull moment with your friend while playing Golf or Baseball.

Now you have more fun activities to liven up your backyard that can essentially boost your family’s fitness instead of sitting down all day, eating and chatting, and not having the means to exercise the body.

Sports have many health benefits, including helping you reach your fitness potential, maintaining a healthy weight, and lowering osteoporosis or breast cancer risk later in life.

Additionally, it creates a beautiful bond that builds the family stronger in love and care. So in this article, we will be discussing the processes or procedures involved in building a backyard backstop for baseball and Golf.

What is Backyard Backstop in Baseball?

A backstop in a baseball is a fence, netting, or other material forms, behind a home designed to protect foul balls from rolling off to the streets or to a neighbor’s house to avoid property damage.

What is Backyard Backstop in Golf?

A golf backstop is a net that will help prevent stray balls from hitting the neighbors windows, car windshield, or from entering the neighbor’s house or yard. To enjoy Golf in your backyard, you need to install a backstop, and it’s easy to build.

Steps on How to Build a Backyard Backstop For Baseball

Backyard Backstop for Baseball and Golf

1. Draw up a plan for your backyard backstop:

Drawing up a plan for your backyard baseball backstop is essential to enable you to know the materials and equipment you need to buy. While building, also considers the heights of your family members in other to enable you to build a suitable one.

A backstop should have three faces: the long one about 15 feet wide and perpendicular to the line created by the pitcher’s mound and home plate.

Two more on either side should be at least 10 feet wide and should be angled towards the basepaths at an approximately 120-degree angle or parallel to the foul lines.

While planning the height, consider the heights of those members of your family who are going to use it. After buying all the materials needed, gather everything together, keep it in a place, and then prepare it for construction.

2. Choose/ pick the suitable materials:

The materials you will depends on the nature of the baseball backstop you want to construct. Here are some materials needed to construct a perfect backyard baseball backstop:

  • Pipes or poles: you can use pipes or poles to serve as a hold for your wires. Choosing either of them depends on the type of backstop you want to construct.
  • Cement: This is used to hold the pole firmly to avoid falling during heavy rain or wind.
  • Gauge wire: These are used to create a chain link that will serve as a barrier preventing The ball from rolling off to the streets.
  • Fence post cap: these are used to cover the sharp end of the metal wire to prevent someone from getting hurt.

3. Digging and installation of the backstop:

You have to dig holes first for four fence posts; while digging the hole, you have to make them be at least 3 feet deep. Once our digging is completed, place your poles inside the holes one by one.

After placing your poles in the holes, pour cement into the holes, make sure you continue until the cement reaches the surface.

Continue this procedure until you have successfully installed all three poles into the holes. Be extra careful not to make mistakes; follow the necessary directions while doing this.

Please wait for the cement to dry up properly, then start making your chain-like face by fixing it by wrapping it with the metal wire gauge.

Each at one end, continue this until you have properly fixed all the gauge metal wire. You can use a six gauge metal wire or eight gauge metal wire. But it’s advisable to use the six gauge wire.

Steps on How To Build a Backyard Backstop For Golf:

1. Draw up a blueprint:

Draw up a plan on how you want your golf backstop to look will enable you to get started on the type of material needed for construction; it will also guide you in buying the suitable materials for your backyard golf backstop.

2. Select/ pick the suitable materials:

Pick all the materials necessary or needed for your construction. Select materials you can use as poles such as:

  • Steel tube
  • Wood beams etc. Depending on your choice of material.

For your net, you can use Baffle nets. They are woven close together; this will enable you not to lose your ball through the nets.

3. Digging and installation:

Use shovels or diggers to dig like 1 to 2 feet holes where you can install your poles. The pole will serve as a frame for the net.

If you want to build a temporary golf backstop, you can use the dirt gotten from the digging to park around the pole after to hold it firm, or If you want it to be a permanent one, you can pour cement in the holes.

4. Attaching the nets:

After digging holes and placing your poles in order, the next step is to attach your baffle net. While fixing or attaching your net, please don’t make it too tight, so you can create a little slack to prevent the net from sending the ball right at you while returning the ball. Also, do not tie your net too loose to prevent your ball from escaping to another neighborhood.


Scroll to Top