The Monstera adansonii, or swiss cheese plant, is famous for its unique and breathtaking appearance. These plants are great climbers known to creep up trees when grown in a natural environment.
These indoor plants are low maintenance and can be easily cared for. They also require little effort to tend and grow, so most homeowners love them.
But how do you care for a Monstera adansonii swiss cheese plant? Care is given to this plant by simply supplying the right amount of water and sunlight along with other requirements.
We explained everything you need to know about this plant, how to propagate them, and the problems to encounter caring for them.
What Is A Monstera Adansonii (Swiss Cheese) Plant?
There are 45 different species of the monstera plant. The name monstera was derived from “monstrous” as it has oddly shaped holes.
The adansonii is the smallest plant in this species. The Monstera Adansonii can be found inside the rain forest in tropical regions like Mexico. They have holes to control the amount of rain and wind that passes through it.
These plants grow as long as 4” to 6,” and the indoor plants climb as high as 10” to 15”. Outdoors these plants can climb as high as 50”.
The Monstera Adansonii grows in a very short time; it can range between 3 to 5 months. And even in this period, it may have dominated a large amount of space.
How to Propagate Monstera Adansonii
¹½All the different species of Adansonii can be propagated the same way by water, soil, or moss. All of these propagation methods are accurate and are not very difficult to carry out, but if you are a beginner, the water propagation method is the best option. But if you are not a beginner, you can choose any of these methods based on preference.
Water Propagation of Monstera Adansonii
The water propagation of monstera adansonii is the easiest propagation method. Your Monstera Adansonii is susceptible to rot when cut without soil or moss involved. Below are the appropriate steps to propagate Adansonii, your Monstera plant using water.
Step 1: Choose a good and healthy monstera plant with one or two nodes and one or two leaves.
Step 2: Use clean and sharp shears, scissors, or knives to cut. Your selected blade should be sanitized with alcohol between each cutting. This is done to prevent bacteria from getting to your monstera. Bacteria in your plant could mean disaster.
Step 3: After cutting the first node, let the second node be an inch longer than before cutting.
Step 4: Place your stem inside a vase of warm water. The water should be a BIT warmer than room temperature.
Step 5: Since the root develops from the node, the node should be completely submerged in water.
Step 6: The leaves will rot if underwater, so it is best that you trim off any leaf inside the water.
Step 7: Your plant should be placed under sunlight to have access to fresh air and sunlight.
Step 8: Your root needs clean oxygen, so you must change the water once a week.
Soil propagation is the most common method of propagating plants, but when it comes to Monstera Adansonii, soil propagation takes longer than water propagation. Below are the step-by-step instructions on how to propagate this plant using soil.
Choose a good and healthy monstera plant with one or two nodes and one or two leaves.
Your plant should be cut below the second node from the top. This cutting should be about 3 inches long. Remember, you always sanitize your cutting tool before using it on the plant.
Insert the cutting below the soil or place the cutting on top of the soil with the node side down. Since the roots grow from the node, they should be in contact with the soil.
Ensure that your selected soil has a good drainage system. You can use a potting mix from your local store, but for results, add perlite and some moss to keep your soil aerated.
Place your cutting in an area with adequate sunlight. Air circulation is also essential. Water your plant till it’s well-drained; you should ensure that your soil doesn’t go dry for the first few weeks. It should always be damp.
Miss can be gotten easily gotten from any online store. This method is carried out by wrapping a stem of monstera adansonii with at least two nodes with moss.
You can cover your cutting with moss and tie it up with plastic wrap to help your plant create a humid environment to form its root.
Open the plastic wrap once a week to check if it’s still humid; if it’s not, you will need to supply a little moisture. After a few weeks, new roots should be growing up then you can proceed to transfer the stem to a pot.
How Do You Care for a Monstera Adansonii Plant?
When caring for your monstera adansonii, there are a lot of factors to consider. You need to know about the amount of light and water needed and the soil type needed. Below are some tips to help you properly care for your monstera adansonii plant.
- Your monstera plant needs humidity, and you can do this naturally by growing plants closer together or misting your plant.
- Grow your monstera adansonii in soil containing perlite, charcoal, and a little moss. Your soil should have a pH between 5.5 to 7.0
- Well-drained soil is necessary to prevent root rot.
- Keep your plant a few feet away from a well-lit window as it only needs indirect sunlight.
- In terms of water, your plant should be moist at all times but not flooded.
- You can choose to use fertilizer to grow your plant.
Common Problems with Monstera Adansonii
Even as the monstera adansonii is easy to care for, it usually has some problems that pop up along the way. Fortunately, these problems can be controlled if still mild. Below are some problems common to monstera adansonii
- Leaves turning yellow due to overwatering Rui, poor drainage, and bugs infestation
- Leaves curling due to underwatering and low humidity
- Monstera root rot is a severe problem that is irreversible and is caused by overwatering
- Damage caused by bugs like scales, thrips, spider mites, and fungus gnats.
- Your monstera leaves can also turn black or brown due to underwatering and low humidity.
Frequently Asked Questions about Monstera Adansonii
In this section, we will be answering done of your frequently asked questions about the Monstera adansonii.
What is the Difference Between Monstera Obliqua and Monstera Adansonii?
Monstera adansonii has much more holes than monstera obliqua, while the latter is rare and has much bigger holes than the former. Monstera obliqua is more like lace than a leaf and cannot be easily found.
How Long Does it Take The Monstera Adansonii Plant to Grow?
It can take a few weeks to several months to grow fully. However, their growth depends on the care given to these plants. Proper care means proper growth, and inadequate care will cause poor growth.
Is Monstera Adansonii Rare?
Other species of monstera species like the monstera obliqua and the monstera Albo are rare, but the monstera adansonii is not very rare. The adansonii is a popular climber that can be used as an indoor plant.
Adansonii can be easily grown and cared for at home compared to other species of monstera that are not very common to homeowners.
How Fast Does Monstera Adansonii Grow?
The growth rate of monstera adansonii depends on the method of propagation and the amount of care given to the plant.
In water propagation, you can observe the growth of the root and leaves after 4 to 6 weeks. Then after several months, your monstera plant should be fully grown.
In soil propagation, it takes several weeks to observe the small growth of your plants, but in three months, it should be fully grown.
In moss propagation, it takes just several weeks for your monstera plant to be fully grown.
Is Monstera Adansonii Easy to Care For?
This plant species is easy to care for as you can easily supply or with light, water, and fertilizer if needed.
Sometimes they generate humidity themselves, so that aspect may not be a problem for you.
However, you also need to be cautious when taking care of these plants. Excess water and sunlight can be bad for this plant in so many ways.
Does Monstera Adansonii Need a Lot of Water?
While this plant needs a lot of humidity to keep it moist at all times, too much water can be disastrous. When your soil doesn’t have good drainage, it retains water which can be harmful to your monstera plant.
Flooding this plant with water can cause problems we discussed earlier, like yellowing the leaves and root rot. Root rot is a several monstera adansonii problems that can lead to the death of your plant.
Can Monstera Adansonii Take Full Sun?
The swiss cheese plant can only take full sunlight in the morning, but it needs indirect sunlight for about 6 hours at other times. Indirect sunlight can be given to your plant by keeping it a few feet away from a well-lit environment.
Keeping your adansonii plant under full sunlight can cause sunburn to the delicate leaves of this plant. You can also keep the swiss cheese plant under shade, but it will experience a period of slow growth.
How Do You Care For Monstera Adansonii Indoors?
Caring for a monstera adansonii plant indoors Is similar to caring for the outdoors. As you already know, you will need to supply this plant with adequate water being careful not to flood your vase.
You should keep your plant pot a few inches away from a well-lit window as it needs indirect sunlight.
You should keep the soil moist at all times, and you can also add fertilizer like perlite, moss, and charcoal to boost the growth of your swiss cheese plant.
Should I Mist My Monstera Adansonii?
Your monstera adansonii should not be left to dry; this can lead to your plant having some problems like curling leaves and coloration of leaves. Misting involves using a spray bottle to supply a certain amount of water to plants.
Monstera plants grow well in a humid environment; hence it requires misting to keep the soil moist at all times. If you have a different species of monstera, you should find out if it requires misting.
At the end of this article, you should know how to care for your monstera adansonii plant. You can propagate this plant by soil, water, and moss. We have also provided the necessary conditions for these plants to grow.
The Swiss cheese Swiss plant takes weeks to months to fully grow, but this all depends on the method of propagation and the care given to the plant.
The monstera plant does not need a lot of water and sunlight, but it does need humidity. With these tips, you should be able to care for your monstera adansonii swiss cheese plant.
- Tips for Growing Lavender in Florida
- How To Compost Corn Plants
- Can You Compost Pineapple?
- Should I Mix Grass Seed with Topsoil
- Can You Dethatch St. Augustine Grass?
We trust this article helped you learn how to care for a Monstera Adansonii plant. You may also want to check out How to Grow Yellow Daisies in Your Garden.
Thanks for taking the time to read our article, and we hope you find it helpful. Would you mind leaving a comment below if you have any suggestions?
Kindly reach out to people by sharing this post on social media.